Range of motion after thoracolumbar corpectomy: evaluation of analogous constructs with a novel low-profile anterior dual-rod system and a traditional dual-rod system

STUDY DESIGN: An in vitro biomechanical study.

OBJECTIVES: To compare the biomechanical stability of traditional and low-profile thorocolumbar anterior instrumentation after a corpectomy with cross-connectors. Dual-rod anterior thoracolumbar lateral plates (ATLP) have been used clinically to stabilize the thorocolumbar spine.

METHODS: The stability of a low-profile dual-rod system (LP DRS) and a traditional dual-rod system (DRS) was compared using a calf spine model. Two groups of seven specimens were tested intact and then in the following order: (1) ATLP with two cross-connectors and spacer; (2) ATLP with one cross-connector and spacer; (3) ATLP with spacer. Data were normalized to intact (100 %) and statistical analysis was used to determine between-group significances.

RESULTS: Both constructs reduced motion compared to intact in flexion-extension and lateral bending. Axial rotation motion became unstable after the corpectomy and motion was greater than intact, even with two cross-connectors with both systems. Relative to their respective intact groups, LP DRS significantly reduced motion compared to analogous DRS in flexion-extension. The addition of cross-connectors reduced motion in all loading modes.

CONCLUSIONS: The LP DRS provides 7.5 mm of reduced height with similar biomechanical performance. The reduced height may be beneficiary by reduced irritation and impingement on adjacent structures.